tjessen

tjessen | Reputations

tjessen 60

3M Application Engineer

Administrator

3M Senior Application Engineer

	Posted an answer Backboard re-attachment Thank you for bringing your adhesive bonding question to 3M. One possible solution would be to use a liquid adhesive like Marine Adhesive Sealant 4000 UV. It has been used in similar applications with...	August 24, 2020	5
	Posted an answer 78 spray application issue They may want to not use as much or apply it in a little faster motion. To us it sounds like an over application of the adhesive. Watch the video, not sure it is different than what was sent to them already....	June 23, 2020	5
	Posted an answer Polycarbonate foam Makrolon SF810 Adhesive That you for considering 3M Adhesives. If you wanted to try a spray adhesive I suggest you look at our Spray 74 or the versatile Spray 90 as a couple possibilities. 3M Hot Melt Adhesive 6111 and PUR...	April 27, 2020	5
	Posted an answer Bonding Brass to Fiberglass Thank you for considering 3M Adhesives. One product you could consider would be Scotch-Weld Multi-Material & Composite Urethane Adhesive DP6310NS. This would work for both the brass insert and the...	April 23, 2020	5
	Posted an answer EPDM to aluminum faced insulation board Mushroommatt, I think you could be heading in the right direction with the 4799 but the one thing I noticed when I reviewed the Tech Data Sheet was that it loses strength at elevated temperatures. As long...	April 23, 2020	5
	Posted an answer how do i boat bond seat cushion to plastic frame ? Thank you for contacting 3M with your bonding and adhesive needs. I would suggest you look at a couple of our spray adhesives like Spray 90 or Spray 74. A lot depends upon the plastic you are trying to...	April 23, 2020	5
	Posted an answer Attach HDPE to wood Thank you for contacting 3M for your bonding and adhesives needs. I am guessing this is a one time need and would suggest you go to your local home store or order online an aerosol can of Spray 90 as this...	April 23, 2020	5
	Posted an answer DP460 bonding Matt, We would suggest you test the DP460 with PTFE as that is a very difficult substrate to bond to. You can try PEEK also but you may build a small amount of strength to that substrate and it may not...	February 10, 2020	5
	Posted an answer Will 3532 A/B bond to rough sanded Acrylic Powdercoat ? Abrading the surface to be bonded before applying the adhesive should enhance the bond strength. Make sure you are cleaning the surface after doing the abrading with the 100 grit sandpaper. We believe...	February 7, 2020	5
	Posted an answer How to set up a spray gun for sprayables adhesives Thank you for contacting 3M with your question. The following links will take you to Youtube and our Automotive Aftermarket channel that will show the proper adjustment of the Accuspray gun. These videos...	December 4, 2019	5
	Posted an answer Quick fixture time Thank you for your question about 3M Adhesives. We will suggest a couple possible solutions that you can try for this application. We have a line of Instant Adhesives and you could try using our Scotch-Weld...	December 3, 2019	5
	Posted an answer 3M Accuspray System and Fastbond Contact Adhesive 30NF Thank you for contacting 3M with your adhesive question. Yes you can use the PPS Spray applicator for applying the 30NF. We suggest that you remove the screen liner that is on the underside of the cup...	December 3, 2019	5