AnneOfAllTrades | Reputations AnneOfAllTrades28 Community Member Subscriber QuestionsAnswersReputations Asked a question Any suggestions for uses of 3M's adhesives around my farm?Anne here again, sharing a final update on my blacksmith renovation project, which is sponsored by 3M. Ever since we moved to this property 3 years ago, I have wanted to turn this space into my dream... September 4, 2019 2 Posted an answer What’s the best method to adhere a gable vent to my shop?Thank you, John, for your answers and quick response. Per your recommendations, I decided to attach the gable vent with 3M’s solution to construction adhesive: 3M™ Scotch-Weld™ Polyurethane... August 28, 2019 5 Asked a question What's the best method to adhere a gable vent to my shop?The next stage of my blacksmith renovation project, sponsored by 3M, is in full swing. I’ve partnered up with 3M to post the stages of my project here on the 3M Industrial Community and this week I’m... August 26, 2019 2 Posted an answer What is the setting time for 3M’s PUR Adhesive?Thanks John for your help! I’m glad the setting time was so short as it meant I could press the acrylic against the wall studs by hand until it set. The next job was to prepare the acrylic. Before attaching... August 22, 2019 5 Posted an answer What is the best method for creating a metal to metal bond?Thanks John! As suggested, I prepped the surface with 320 grit sandpaper and cleaned it with isopropyl alcohol. Then, I applied the tape and rolled it with a J roller to assure proper adhesion to the... August 19, 2019 5 Asked a question What is the setting time for 3M's PUR Adhesive?This is Anne of All Trades and I’m back with the workshop renovation I’m completing this week. This project is sponsored by 3M and I am working in partnership with the 3M experts on this forum to complete... August 19, 2019 2 Posted an answer What is the best method for creating a metal to metal bond?Thanks John for your help! I’m glad the setting time was so short as it meant I could press the acrylic against the wall studs by hand until it set. The next job was to prepare the acrylic. Before attaching... August 16, 2019 5 Asked a question What is the best method for creating a metal to metal bond?I’m Anne, a homesteader, blacksmith and woodworker living in Seattle. I run the YouTube channel and Instagram page, Anne of All Trades, and I’ve partnered up with 3M on my current project to renovate... August 13, 2019 2