SubscriberI was sold 3M 3532 A/B to bond a plastic part to a carbon fiber/epoxy surface (i.e. not painted) Some of the surfaces I wish to add the plastic part are Acrylic Powdercoat (over carbon fiber). Will the 3532 A/B bond to Acrylic surfaces if it is rough sanded with 100 grit sandpaper ?
60
tjessen
3M Application Engineer
Abrading the surface to be bonded before applying the adhesive should enhance the bond strength. Make sure you are cleaning the surface after doing the abrading with the 100 grit sandpaper. We believe that the 3532 A/B will bond but we also suggest you do testing to verify that it will work.
No comments found.
