The next stage of my blacksmith renovation project, sponsored by 3M, is in full swing. I’ve partnered up with 3M to post the stages of my project here on the 3M Industrial Community and this week I’m tackling a gable vent to keep a safe airflow in the shop.
I’ve got the gable vent designed and built – I just wanted to jump on the 3M Industrial Community to get the engineer’s advice on what would be the best method to adhere the gable vent. The dimensions are 18”x26”, it’s made of cedar and I want to adhere it to Douglas fir studs on the painted wood exterior of the blacksmith shop.
Can’t wait to get this project completed and start using my shop!
Thank you, John, for your answers and quick response.
Per your recommendations, I decided to attach the gable vent with 3M’s solution to construction adhesive: 3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Adhesive.
I sanded the wood surfaces and cleaned them to prep for adhesion. I heated the glue for 45 minutes in the applicator, installed an application nozzle, attached the air hoses, and added a ¼ inch thick bead of glue around the four edges of the gable and pressed it into place. The glue dries to the touch fairly quickly but cures fully in 24 hours.
Thanks for all your help, John – this project is starting to look really great. This was a very quick and easy project that is a major improvement to the space.