3M Industrial Community

Use this forum to ask us how our wide range of bonding products can improve product design and make assembly processes more efficient.

1 Ans

Has VHB tape been used in subsea applications?

2.05K viewsDaniel Mattsson-Boze asked July 27, 2018Bonding and Assembly

1 Ans

Is there a solution to bond a plastic box (size of Roku box) to a rough stucco wall in an outdoor environment?

1.86K viewsLisa Kappes commented on answer July 30, 2018Bonding and Assembly

1 Ans

Vitreous china repair

2.49K viewsRobert Gentile Posted new comment November 15, 2018Bonding and Assembly

1 Ans

Adhesive film that can protect shoe soles

2.05K viewsMarcus Ong asked June 25, 2018Bonding and Assembly

1 Ans

How well does panel bond hold up in water?

1.94K viewsAnonymous deleted answer June 16, 2018Water Intrusion

1 Ans

Bonding aluminum sheet in high temp application

1.96K viewsJohn Merchant answered May 30, 2018Bonding and AssemblyAluminum High-Temp

1 Ans

Rubber mat to horse trailer wall

2.95K viewsJohn Merchant answered May 16, 2018Bonding and Assembly

1 Ans

I don’t have access to spray equipment, how can I apply a contact adhesive?

2.40K viewsMatt Wangsness deleted answer February 15, 2018Bonding and Assembly

1 Ans

My bonding area is very small but I really need high strength. What types of adhesives should I use?

2.31K viewsAnonymous deleted comment February 14, 2018Bonding and Assembly

1 Ans

I’m bonding to a PTFE breathable vent membrane and the other substrate is ABS, I need a supported tape product because of our manufacturing process. I need a tape that can handle -40 C to 105 C, what can I use?

2.13K viewsJohn Merchant changed status January 25, 2018Water Intrusion

1 Ans

I’m trying to adhere to an open cell foam and having trouble with getting good bond strength to the foam, what can I do to get better adhesion?

2.28K viewsShari Loushin answered April 20, 2018Water Intrusion

1 Ans

I’m trying to attach veneers and veneer edge banding to a particle board surface, but the current hot melt process is too slow and damaging the veneer; is there a faster way that doesn’t use heat?

1.95K views3M Industrial Community asked November 29, 2017Bonding and Assembly

1 Ans

How can I easily and quickly attach a decorative stainless steel trim piece to ABS plastic?

2.15K views3M Industrial Community asked November 29, 2017Bonding and Assembly

1 Ans

I would like to have a very small joint for aesthetic reasons. What are my limitations?

1.85K views3M Industrial Community asked November 16, 2017Bonding and Assembly

1 Ans

How do I seal a joint that will be immersed in water/oil/coolant?

1.91K views3M Industrial Community asked November 16, 2017Water Intrusion

1 Ans

How do I seal between glass and gelcoated fiberglass on a boat?

1.71K views3M Industrial Community asked November 16, 2017Water Intrusion

« Previous 1 2 3 4